CUMMINS 0445116010 injector

Designation of housing:PLE211N-; A1:39.5 mm; d:55.56 mm; N:18mm; Designation of open end cover:SCOU211-35; B:55.6 mm; S:22.2 mm; Designation of bearing:UC211-35G2L3; Z:78.9 mm; Dz:110 mm;

e:18 mm; A1:13 mm; N:16mm; Recommended tightening torque for set screw:5.5 Nm; S:15.9 mm; C0:11.2 kN; Designation of housing:FL206N-; T min.:-40 °C; s1:19.05 mm; A:31 mm;

A2:55.9 mm; Designation of bearing:EX208-24G2T04; e:21 mm; N:14mm; A:37.5 mm; Weight:1.83 kg; A1:13 mm; G:R1/8"; s1:39.7 mm; Designation of housing:FLE208-;

d:31.75 mm; Weight:1.37 kg; Designation of open end cover:SCOU206-20; Recommended tightening torque for set screw:3.9 Nm; L:108 mm; s1:19.05 mm; Designation of bearing:SUC206-20; A:30.5 mm; A2:40.2 mm; T min.:-20 °C;

B:38.1 mm; C0:11.2 kN; d:31.75 mm; E:18 mm; H1:13 mm; s1:19.05 mm; J:66 mm; Designation of housing:PA206N-; A1:25 mm; Dz:70 mm;

v:20 mm; fixing bolts G:M12; Connection bolts:M10x45; h1:93 mm; l3:100; recommended torque:65 Nm; b:52 mm; initial grease quantity:65 Volume_cmc; P 120°:85 kN; V-ring option:V25A;

Bearing Inner Ring Material:Steel; Housing Type:Tapped Base Pillow B; Retainer Material:Nylon; Bearing Thread Type:UNC; Self Aligning:Self Centering; Seal Type:Single Lip; Bearing Locking Device:Setscrew; Bearing Duty:Normal Duty; Housing Coating:Powder Coat; Bearing Series:211 Series;

s1:39.7 mm; T min.:-40 °C; Recommended tightening torque for set screw:8 Nm; d:42.86 mm; H2:61 mm; C:31.85 kN; C0:20.8 kN; Designation of bearing:EX209-27G2T04; A5:21.4 mm; d1:62 mm;

T min.:-20 °C; L:117 mm; A1:15 mm; A2:44.4 mm; C0:15.2 kN; Weight:1.56 kg; G:M6x1; N:14mm; Designation of open end cover:SCOU207-21; d:33.34 mm;

T max.:200 °C; H1:13 mm; H2:84 mm; d:31.75 mm; d1:44.1 mm; B:36.4 mm; G:M6x1; Designation of bearing:EX206-20G2T20; J:66 mm; Designation of housing:PA206-;

D:120 mm; B:31 mm; Characteristic cage frequency, FTF:0.42 Hz; Y2:4.15; Min operating temperature, Tmin:-40 °C; Static load, C0:212 kN; Characteristic rolling element frequency, BSF:6.18 Hz; Radial clearance class:CN; rs min:1.5 mm; Nref:5,300 rpm;

Dynamic load, C:155 kN; Fatigue limit load, Cu:18 kN; Number of lubrication holes:3; Characteristic outer ring frequency, BPF0:7.62 Hz; b:6.4 mm; Min operating temperature, Tmin:-20 °C; D:100 mm; e:0.23; k:3 mm; da min:63.4 mm;

G:M6x1; e:16 mm; Z:39.6 mm; S:7.5 mm; L:68 mm; A2:35.5 mm; Dz:60 mm; A:27 mm; C:14 kN; Designation of housing:FA205N-;

r:1.1; Weight:0.74 kg; d1:58 mm; D:80 mm; d:40 mm; B:42.8 mm; B2:18.3 mm; B1:56.3 mm; S:21.4 mm; G:M8x1;

ra max:2 mm; d:130 mm; Mass:10.3 kg; Characteristic rolling element frequency, BSF:8.04 Hz; Y1:1.96; rs min:2 mm; Y0:1.92; b:10.32 mm; D1:183.2 mm; da min:141 mm;